Long weld same diameter tee maintenance method

Long welded same diameter tee is a common pipeline connectors, in the use of the process need to carry out regular maintenance, in order to extend the service life, to ensure the safe operation of the system. The following is an introduction to the long welded same diameter tee maintenance methods.

First, clean long welded same diameter tee

Long welded same diameter tee will be contaminated by sediments in the process of use, need to be cleaned. Before cleaning, the pipeline system should be deactivated, dismantle the long welded same diameter tee. Then the surface of the long welded same diameter tee and the internal channel should be cleaned with detergent and water, especially the cleaning of the interior, to thoroughly remove the accumulated dirt.

Second, check whether there is damage to the long welded same diameter tee

Long welded same diameter tees may suffer damage during use, such as abrasion, cracks, potential cold cracks, etc., which will affect the service life and safety of long welded same diameter tees. It is necessary to regularly check whether there is any obvious damage to the interior and surface of the long welded same diameter tee, and if there is any damage, it should be replaced in time.

Third, protect the long welded same diameter tee

Long welded same diameter tee should be protected from corrosion and damage by the long welded surface and end face during use. You can also choose to install the long welded same diameter tee in the protective sleeve to extend the life of the long welded same diameter tee.

Fourth, pay attention to the maintenance cycle

The maintenance cycle of the long welded same diameter tee needs to be formulated according to the use of the situation, but it is generally recommended to carry out thorough maintenance at least once a year to ensure that the long welded same diameter tee is in good working condition.

Record maintenance records

Each time the maintenance of long welded same diameter tee, should develop a maintenance plan, record the maintenance date, maintenance content and maintenance personnel and other information for future reference.

In short, the maintenance of the long welded same diameter tee is an important part of ensuring the safety and durability of the system, which needs to be carried out on a regular basis and should not be ignored.